In addition to the excellent quality, the outer spherical bearing is also a very precise part. If it is not used properly in the process of use, it will not only fail to achieve the expected performance effect, but also easily damage the outer spherical bearing. We must have paid attention to the lubrication. In addition to lubrication, in the process of using spherical bearings, what other aspects need to be paid attention to.
1、 When using and installing, it is necessary to be careful. It is not allowed to punch the motor bearing. The solution is not allowed to knock the outer spherical bearing directly with a hammer. It is not allowed to transfer the pressure through the rolling element.
2、 Use appropriate and accurate installation tools, try to use special tools, and try to avoid using cloth and short fiber.
3、 Try to keep the outer spherical bearing and its surrounding environment clean. The motor bearing generally uses sodium grease. Even if the tiny dust invisible to the naked eye enters the outer spherical bearing, it will increase the wear, vibration and noise of the outer spherical bearing.
4、 To prevent the outer spherical bearing from rusting, when the outer spherical bearing is taken directly by hand, the sweat on the hand should be fully washed off, and then the operation should be carried out after being coated with high-quality mineral oil, especially in rainy season and summer. Under some special operating conditions, the life of spherical bearing can be longer than that of traditional calculation, especially in the case of light load. Analysis of the mechanism and influencing factors of labyrinth seal for spherical bearing housing these special operating conditions are that the surface damage may be caused when the rolling surface (track and rolling element) is effectively separated by a lubricating oil film and the pollutants are limited
Post time: Apr-16-2021